Wie Lüfter anschließen
Hi,
Grafik: V9999 von Asus
Lüfter dafür: NV Silencer 5 von Arctic Cooling
Netzteil: Chieftec 360W
Problem: Steckplatz Graka 3polig. Lüfterkabel 2polig (rot, schwarz)
Wie schließe ich das Ding jetzt an? Habe keine passenden Anschluss am Netzteil oder sonstwo.
Antwort schreiben
Antwort 1 von Lutz1965 vom 21.03.2019, 06:39 Options
Hallo
aus einem anderen Forum...
Zitat:
zitat: Asus is unfortunately not following ATIs/NVIDIAs solutions and therefore our plug doesn't fit. You can either cut both plugs and connect the wires correspondingly or you can also get 12 Volt power directly from the PSU. There you have to connect the wires as follows: black with black and red (VGA) with yellow (PSU). The yellow cable from the VGA is an RPM signal, that is not needed.
Quelle: wintotal-forumAsus V9999GT/TD/128
Arctic Cooling NV Silencer 5Also ich kenne keinen Adapter dafür....da ist wohl selber basteln angesagt...
Gruss
Lutz
Antwort 2 von tomsan vom 21.03.2019, 07:48 Options
Hatte von Alternate einen Adapter auf Nachfrage bekommen.
Musst mal Deinen Händler fragen.
Gruss
Tomsan
Antwort 3 von troubleboy vom 21.03.2019, 19:52 Options
Danke fuer die Antworten.
Wie ist das eigentlich mit der Luefterregelung, das sollte so eine teure Graka ja haben. Wenn ich den Luefter jetzt aber direkt and das Netzteil anschliesse, wird ja nichts mehr heruntergeregelt.
Macht es daher Sinn einen passenden Stecker fuer die Graka von einem anderen Luefter abzuzwicken, einzustecken und daran dann den Silencer anzuschliessen, statt ans Netzteil, aendert das etwas?