online 1
gast (50)

/ Forum / Linux

LinuxLinux

Fragevon MandrivaUser vom 04.06.2021, 17:59 Options

MausZeiger springt bei jedem Klick in Ecke

Hallo,
Ich habe ein Problem.
Jedesmal wenn ich Sauerbraten oder OpenArena spiele,
springt bei jemdem Klick der Mauszeiger in rechts-untere Ecke.
Bei anderen Anwendungen, oder auf dem Desktop, hab' ich dieses Phänomen nicht.
Woran könnte das liegen ??
Ich will endlich wieder zocken, helft mir :C


Antwort schreiben

Antwort 1 von gresti vom 05.06.2021, 00:37 Options

@MandrivaUser,

konfigurier doch mal deine Maus dann klappt das auch mit den Nachbarn ehm Spielen.

Und noch ne Frage: welches Linux bereitet dir das Problem?

gruß
gresti

Antwort 2 von MandrivaUser vom 05.06.2021, 13:28 Options

@ gresti

Maus konfiguriert hab ich schon.
Ist natürlich das erste, was man versucht.
Und die Distrbution solltest du meinem Nickname entnehmen können ;-)

Antwort 3 von Josee vom 05.06.2021, 16:16 Options

Poste deine xorg.conf

Antwort 4 von MandrivaUser vom 05.06.2021, 17:48 Options

Hier die Xorg.conf:

# File generated by XFdrake (rev 256990)


Section "InputDevice"
    Identifier "Mouse1"
    Driver "mouse"
    Option "Protocol" "ExplorerPS/2"
    Option "Device" "/dev/input/mice"
EndSection

Section "InputDevice"
    Identifier "Mouse2"
    Driver "evdev"
EndSection
# File generated by XFdrake (rev 256990)
# **********************************************************************
# Refer to the xorg.conf man page for details about the format of
# this file.
# **********************************************************************

Section "ServerLayout"
    Identifier "layout1"
    InputDevice "Keyboard1" "CoreKeyboard"
    InputDevice "Mouse1" "CorePointer"
    InputDevice "Mouse2" "SendCoreEvents"
    Screen 0  "screen1" 0 0
EndSection

Section "Files"
    EndSection

Section "Module"
    Load "dbe" # Double-Buffering Extension
    Load "v4l" # Video for Linux
    Load "extmod"
    Load "glx" # 3D layer
    Load "dri" # direct rendering
EndSection

Section "ServerFlags"
    #DontZap # disable <Ctrl><Alt><BS> (server abort)
    #DontZoom # disable <Ctrl><Alt><KP_+>/<KP_-> (resolution switching)
    
    # allows the server to start up even if the mouse does not work
    Option "allowmouseopenfail"
EndSection

Section "InputDevice"
    Identifier "Keyboard1"
    Driver "kbd"
    Option "XkbModel" "pc105"
    Option "XkbLayout" "de(nodeadkeys)"
    Option "XkbOptions" "compose:rwin"
EndSection

Section "Monitor"
    Identifier "monitor1"
    VendorName "Plug'n Play"
    ModelName "Acer X233H"
    HorizSync 30.0 - 94.0
    VertRefresh 49.0 - 75.0
EndSection

Section "Device"
    Identifier "device1"
    VendorName "ATI Technologies Inc"
    BoardName "ATI Radeon HD 2000 and later (radeon/fglrx)"
    Driver "fglrx"
    BusID "PCI:2:0:0"
    Option "DPMS"
EndSection

Section "Screen"
    Identifier "screen1"
    Device "device1"
    Monitor "monitor1"
    DefaultDepth 24
    
    Subsection "Display"
        Depth 8
        Modes "1920x1080" "1600x900" "1366x768" "1360x765" "1280x720"
    EndSubsection
    
    Subsection "Display"
        Depth 15
        Modes "1920x1080" "1600x900" "1366x768" "1360x765" "1280x720"
    EndSubsection
    
    Subsection "Display"
        Depth 16
        Modes "1920x1080" "1600x900" "1366x768" "1360x765" "1280x720"
    EndSubsection
    
    Subsection "Display"
        Depth 24
        Modes "1920x1080" "1600x900" "1366x768" "1360x765" "1280x720"
    EndSubsection
EndSection

Section "Extensions"
    Option "Composite" "1"
EndSection


Im Abschnit "Extensions" hab ich Composite manuell aktiviert.

Antwort 5 von MandrivaUser vom 05.06.2021, 19:14 Options

Hi, ich bins wieder

WoP zeigt gleiches Verhalten...

Antwort 6 von Josee vom 05.06.2021, 20:04 Options

Option "Protocol" "ExplorerPS/2"

Das Argument muss geändert werden.
Ich schau mal eben nach. Vielleicht hat es auch bereits jemand vor mir raus.

Antwort 7 von Josee vom 05.06.2021, 20:07 Options

So, hier hast du die Dok.
Such dir das für DEINE Maus passende Protokoll aus!

http://www.x.org/archive/X11R6.8.2/doc/mouse6.html

Antwort 8 von passiert vom 05.06.2021, 21:29 Options

Wenn die Maus im normalen Betrieb funktioniert, hat das nichts, aber überhaupt nichts mit dem verwendeten Protokoll zu tun!
Woher weißt du denn, dass er das falsche Protokoll verwendet?
ExplorerPS/2 ist gültig und wenn er solch eine Maus verwendet spricht nichts dagegen.

@ Gresti: Ohne worte ;)

Antwort 9 von Josee vom 05.06.2021, 21:35 Options

Spielen ist auch unter Linux normaler Betrieb. Er hat Probleme und diese haben de facto auch mit dem verwendeten Protokoll zu tun.
Sonst gäb es sie nicht.

Das hat schon in der Vergangenheit bei Mausproblemen immer geholfen und wird es auch jetzt.

Antwort 10 von Josee vom 05.06.2021, 21:38 Options

@passiert -> @gestri "ohne Worte"

Ich sehe welche. @passiert: Irgendetwas scheint mit deinem Browser oder deiner Brille nicht zu stimmen 8-)

Antwort 11 von passiert vom 05.06.2021, 22:00 Options

Ob Spielen normaler Betrieb ist, darüber lässt sich streiten.
OpenArena nutzt openGL und damit GLX.
Technisch gesehen besteht also ein großer Unterschied.

Das Problem liegt IMHO entweder in der "Device"-Section oder in der Verwendung eines Compositing-WM.
Dafür spricht auch die Vorletzte Zeile seiner xorg.conf.

Beste Grüße

PS: "Ohne Worte" bezog sich eher auf den Inhalt^^

Antwort 12 von MandrivaUser vom 06.06.2021, 09:19 Options

Also,
hier die neue Xorg.conf



# File generated by XFdrake (rev 256990)
# File generated by XFdrake (rev 256990)
# **********************************************************************
# Refer to the xorg.conf man page for details about the format of
# this file.
# **********************************************************************

Section "ServerLayout"
	Identifier     "layout1"
	Screen      0  "screen1" 0 0
	InputDevice    "Keyboard1" "CoreKeyboard"
	InputDevice    "Mouse1" "CorePointer"
	InputDevice    "Mouse2" "SendCoreEvents"
EndSection

Section "Files"
EndSection

Section "Module"
	Load  "dbe" # Double-Buffering Extension
	Load  "v4l" # Video for Linux
	Load  "extmod"
	Load  "glx" # 3D layer
	Load  "dri" # direct rendering
EndSection

Section "ServerFlags"

    #DontZap # disable <Ctrl><Alt><BS> (server abort)
    #DontZoom # disable <Ctrl><Alt><KP_+>/<KP_-> (resolution switching)
    # allows the server to start up even if the mouse does not work
	Option	    "allowmouseopenfail"
EndSection

Section "InputDevice"
	Identifier  "Mouse1"
	Driver      "mouse"
	Option	    "Protocol" "Auto"
	Option	    "Device" "/dev/input/mice"
EndSection

Section "InputDevice"
	Identifier  "Mouse2"
	Driver      "evdev"
EndSection

Section "InputDevice"
	Identifier  "Keyboard1"
	Driver      "kbd"
	Option	    "XkbModel" "pc105"
	Option	    "XkbLayout" "de(nodeadkeys)"
	Option	    "XkbOptions" "compose:rwin"
EndSection

Section "Monitor"
	Identifier   "monitor1"
	VendorName   "Plug'n Play"
	ModelName    "Acer X233H"
	HorizSync    30.0 - 94.0
	VertRefresh  49.0 - 75.0
EndSection

Section "Device"
	Identifier  "device1"
	Driver      "fglrx"
	VendorName  "ATI Technologies Inc"
	BoardName   "ATI Radeon HD 2000 and later (radeon/fglrx)"
	Option	    "DPMS"
	BusID       "PCI:2:0:0"
EndSection

Section "Screen"
	Identifier "screen1"
	Device     "device1"
	Monitor    "monitor1"
	DefaultDepth     24
	SubSection "Display"
		Depth     8
		Modes    "1920x1080" "1600x900" "1366x768" "1360x765" "1280x720"
	EndSubSection
	SubSection "Display"
		Depth     15
		Modes    "1920x1080" "1600x900" "1366x768" "1360x765" "1280x720"
	EndSubSection
	SubSection "Display"
		Depth     16
		Modes    "1920x1080" "1600x900" "1366x768" "1360x765" "1280x720"
	EndSubSection
	SubSection "Display"
		Depth     24
		Modes    "1920x1080" "1600x900" "1366x768" "1360x765" "1280x720"
	EndSubSection
EndSection

Section "Extensions"
	Option	    "Composite" "Disable"
EndSection


Hab 'aticonfig --initial' drübergebügelt, deshalb ist Compositing wieder deaktiviert.
Ausserdem hab ich jetzt ein paarmal das Protokoll MausProtokoll geändert, tut sich aber nichts.
Hat noch einer 'ne Idee ?

Antwort 13 von MandrivaUser vom 06.06.2021, 09:58 Options

Hab mal wieder ein Spiel getestet: nethack Falconsey.
Und wieder, die Maus verspringt.
Ich denke, das wird bei allen Spielen im Vollbildmodus passieren.

Antwort 14 von bored vom 06.06.2021, 10:15 Options

Ich persönlich tippe einfach mal darauf, dass deine Maus kaputt ist, und das nur bei schnellen Mausbewegungen zutage tritt (hatte ich auch schon mal mit einer von Razer).

Schliess mal ne andere an und schau, ob's damit geht.

Antwort 15 von MandrivaUser vom 06.06.2021, 11:52 Options

@ bored
Nein, meine Maus ist definitiv nicht kaputt :)
Ich habe ein OCZ Equalizer, die unter Windows voll funktionstüchtig ist.
Außerdem versprigt die Maus nicht bei schnellen Bewegungen, sondern bei Mausklicks...

MandrivaUser

Antwort 16 von passiert vom 06.06.2021, 12:25 Options

Läuft das Spiel denn trotzdem weiter(Animationen, etc.) und lässt sich die Tastatur(Ctrl-ALt-F?) benutzen?

Antwort 17 von htt vom 06.06.2021, 15:23 Options

Hallo,

das liegt an evdev wenn du auf mouse wechselst funktioniert alles.

Gruß

Antwort 18 von MandrivaUser vom 06.06.2021, 16:02 Options

@htt

Kannst du dich etwas genauer Ausdrücken ?

Antwort 19 von htt vom 06.06.2021, 16:05 Options

Entferne aus der xorg.conf:
Section "InputDevice"
	Identifier  "Mouse2"
	Driver      "evdev"
EndSection

Antwort 20 von MandrivaUser vom 06.06.2021, 17:01 Options

@ htt

Klasse Leistung -.-

Hab die Zeilen entfernt,
dann startete aber leider mein Rechner nicht mehr.
Es kam nur noch 'n schwarzer Bildschirm und ein Cursor.
Musste ein mit der LiveCD ein Backup von der conf einspielen.

MandrivaUser

Ähnliche Themen

passwort unter ami ausschalten
schwedenopa  20.03.2006 - 2549 Hits -

Frage Unterschied
Funi  25.11.2007 - 70 Hits - 3 Antworten

Dbox2 pin ändern---WIE??
Maut1500  24.11.2007 - 110 Hits - 3 Antworten

NDISWRAPPER installieren
Ingoo  31.01.2008 - 76 Hits - 14 Antworten

wine unter 10.2
steffen91011991  24.11.2007 - 75 Hits - 1 Antwort

Hinweis

Diese Frage ist schon etwas älter, Sie können daher nicht mehr auf sie antworten. Sollte Ihre Frage noch nicht gelöst sein, stellen Sie einfach eine neue Frage im Forum..

Neue Einträge

Version: supportware 1.9.150 / 10.06.2022, Startzeit:Mon Jan 26 09:21:55 2026